Greenhouse RUMBA with Crab system

The permissible load on the surface of the greenhouse is 240 kg/m2! Loads are defined as snowfall and strong gusts of wind,
This can cause vibration or deformation of polycarbonate in weakly fixed places.

✓ The arcs are one-piece, the base and cross bars are made of factory-seam welded pipe with a cross-section of 40x20 mm.
The use of heavy-duty galvanized pipe (wall thickness of 1 mm) with bending pipe "along the rib" strengthens the frame and increases the service life of the greenhouse several times.
✓ The ends - solid and factory assembled with the bend "along the rib" on the side of 20 mm, which provides additional rigidity and durability.
✓ Snow loads - up to 240 kg/m2.
✓System "Crab" - the fastener that connects the arches and cross bars. Provides tight connection of polycarbonate not only to the arcs, but also to the cross bars.
This design properly distributes the external loads over the entire area of the structure.
✓ All metal elements are coated with a double layer of zinc - inside and outside the pipe! The greenhouse is reliably protected against corrosion for many years.
Reliable honeycomb polycarbonate with UV protection and a longer service life is used.
✓ All the fasteners required for assembly, large ground hooks and improved fittings are included.

IMPORTANT: If you are going to put a greenhouse on the foundation,
please pay attention to the dimensions specified in the instruction!

Greenhouse length: 4, 6, 8, 10 м
Thickness of metal: 1mm
Width: 3m
Height: 2 m
Distance between arcs: 0,98 m
Arcs: galvanized pipe 40x20
Cross-bars: galvanized pipe 40x20
Leeches: 2 pcs, solid
Windows: 2 pcs
Doors: 2 pcs